I’ve been sitting on this review for a while now, but it’s worked out better for everyone involved because I’ve had time to truly appreciate this little packet of awesomeness called the T1 from Tralucent Audio.
The T1 is a portable amplifier designed for use with various source units such as iPods, Walkmans, Cowon players, Sansa players, etc. The T1 is normally priced at $250 (US dollars I think) and is specially priced at $229 at the time of this blog post. That pricing places it below well-known and well-loved amplifiers like the Graham Slee Voyager, Meier Audio Corda 2 Stepdance, and Pico Slim. I’m not going to do a direct comparison because I don’t currently have access to all of these models without blowing a lot of $$$, but can assure you that the T1 definitely holds its own in this company and many users of both the T1 and the amps listed above report preferences towards the T1.
The specs of the T1 aren’t published on the website so I can’t give you exact measurements, but I can tell you that the power output is easily ample to drive full size cans like the Sennheiser HD650s and it has enough dynamic range and control to also work effectively at lower volumes with sensitive IEMs like the Shure SE535s and Unique Melody Miracles (or other sensitive customs)
The T1 comes with a nice array of pieces including:
- High quality 3.5mm to 3.5mm interconnect cable (middle)
- 2 elastic bands (grey and black)
- A USB charging cable (bottom right)
- A 9V rechargeable battery (not pictured)
The back panel houses the red charging LED and the mini-USB socket used for charging. Although micro-USB is becoming more and more common, most people will likely still have devices with both so finding a spare micro-USB cable (or ten) shouldn’t be too hard and of course there’s one provided in the box with the T1.
The T1 is a compact portable amplifier, but is not quite as small as some others on the market. As you can see in this image, the footprint of the T1 is about the same as the Fiio E11, but the T1 is about twice as thick.
It’s easily worth the extra cost of real estate when compared to the sound of an amp like the E11 as the T1 far outperforms it’s slimmer cousin.
The T1 fits really nicely behind my full-sized iPods. It makes it basically impossible to put the rig into your pocket, but the T1 + iPod bundle sits nicely in the hand without too much trouble.
Battery Life and Charging
The T1 reaches a full charge in a few hours using USB power and this charge lasts for ages. I’ve successfully used the T1 for about a week of normal use without charging. (That means using it on the 1 hour journey to and from work, plus some incidental listening.) It’s easy to expect it to cover any of your listening needs without interruptions for charging – full days of listening, days of commuting, listening while travelling, etc. I can’t see a fully charged battery failing to see you through in any circumstances.
You can also use the T1 while it’s connected to power. It uses a smart power system that will divert the USB power directly to the amplification circuit when plugged in so you can use it without draining the battery. When I tried this from my computer (which has noticeably noisy USB ports), the amp was unlistenable due to the noise being conveyed. I have heard that the amp works better of mains-powered USB chargers, but haven’t tried this so can’t comment. For me, most listening with the T1 is away from a power source so it’s battery power all the way.
Out of the box, the T1 is a little bit underwhelming. There’s nothing wrong with it, but it doesn’t amaze…
…and that’s why god invented burning-in.
After an overnight burn-in (leaving it connected to headphones and my iPod on shuffle), the T1 grew into its skin and sounded wonderful.
The T1 continued to improve over the following days of use and reached its peak after a week or so of use. I’ve heard 200 hours suggested as the ideal burn-in period for the T1 to reach its full potential. This may be true, but it sounded great after just one night and steadily improved after that, but I wouldn’t wait until the 200 hour mark – just start enjoying it and let it improve.
The Finished Sound
Once burnt-in, the sound of the T1 is exceptional. It’s very neutral and uncoloured – giving you the music as it was recorded and without any significant emphasis.
The T1 reproduces outstanding bass and I was initially unsure if there was a very slight emphasis here or if it just did a better job than some of the other devices I was used to. After extended listening my belief is that it just does a great job of producing and controlling accurate bass reproduction*. It gets the best out of the headphones/earphones connected, but doesn’t seem to add anything to the source material. I haven’t heard bass added to any tracks that I know are light on bass.
*More on this in a later section about IEMs.
In addition to its brilliant bass reproduction, the other area of excellence for the T1 is its staging and transparency.
The T1 produces no audible hiss even at levels above normal listening volume. This means that the music comes at you from a completely blank backdrop and allows every subtle nuance of the recording to come through. The result is a compelling listening experience where there is a beautiful, big and deep stage created. All of the sounds are placed exactly where they should be and the space around each instrument and performer is clearly audible.
The thing I love most about the T1 is its ability to simply enhance the ability of your headphones or earphones in recreating the music. It doesn’t get involved in the reproduction, it just supports and drives your phones to perfection.
The T1 does a great job with the 650s. It’s not able to recreate the dynamics and presence of a mains-powered desktop amp, but it still manages to make the HD650s sound great (subjectively, I’d say around 75-80% of their potential). The soundstage is good and reproduction across the frequency range remains accurate and enjoyable.
The T1 runs at around 40-50% volume to effectively drive the HD650s (depending on the input used).
The low impedance of many IEMs makes them a difficult proposition for many amplifiers and portable devices. A low impedance earphone is actually harder to control than high impedance headphones.
One of the measures used by many to determine the synergy between sources / amplifiers and headphones / earphones is the 1/8 rule. Basically, they want the impedance of the output from the device to be no more than 1/8 of the headphone’s / earphone’s impedance. I don’t know it the 1/8 rule is truly a good measure, but the key is there – the bigger the difference between the source and headphone impedance the better.
IEMs like the Shure SE535s and various customs have impedance around 16 ohms which is very low in the world of headphones. This means finding a source / amp with output impedance that’s very low and the T1 fits the bill.
The T1 has an output impedance of around 0.1-0.2 ohms so you can literally pair it with anything! (From an impedance matching perspective at least)
The result of this brilliantly low output impedance is the T1′s awesome control. The T1 has the ability to exert perfect control over the drivers in your IEMs and the result is punchy and powerful bass without any bloat. By removing bloat, the texture of the bass line can really shine and you get to experience the magic across the full frequency range of your music.
All-in-all, the Tralucent T1 is an amazing amplifier for the money. It’s not flashy or full of features, but instead offers a clean and open presentation of all your music with the ability to pair seamlessly and effectively with any of your earphones / headphones.
For the dollars you’ll be hard-pressed to find anything that comes close to the T1 and it would be very easy to argue that you won’t beat it at almost any price point. Other more expensive portable amps are probably just as good as the T1, but it will be hard to find one that is head and shoulders above the T1 even for more money.